Mr. Z. Mr. Z. is offline

Senior Member

About Me

  • About Mr. Z.
    Biography
    Tribulations build strength of spirit.
  • Signature
    '02 Montero: OME suspension, ARB front bumper, sliders, homemade 4mm skid plates and Blitz can mount,
    extended breathers, K&N air filter, Optima Yellow Top, BajaRack, IPF lights, Superwinch X9,
    Cooper S/T Maxx 265/75/16's, RUD 4x4 Grip Chains

Statistics

Total Posts
Albums
Visitor Messages
General Information
  • Last Activity: 10-27-2022 07:39 AM
  • Join Date: 03-25-2010
  • Referrals: 0

Visitor Messages

Showing Visitor Messages 1 to 9 of 9
  1. iracer99
    11-01-2014 08:27 AM - permalink
    Hello,
    I saw your post regarding brake accumulator from several years back. My '01 just starting to make a chirping sound as brake pedal is released. Noise is coming from just above brake pedal. I am assuming it is due to the accumulator, but just looking for second opinion. Does this sound like the problem you had? Also, when you replaced the accumulator, was there anything that needed to be done, besides just replacing it?
    Thank you for any help.
  2. HunterD
    03-24-2014 10:35 PM - permalink
    Hi Mr. Z, I have a question for you. In one of your posts you said you have bumped up the tire size to 265/75 size. Do you have the same size tire for a spare? If so, does it clear the bumper? I have an '01 Montero and got an OME lift kit on it. I am considering upgrading the tires to a larger size when the ones I have will wear out.
  3. rroederer
    03-11-2013 10:53 AM - permalink
    I am having very simular problem Montero sport 2001. I took 500 mile road trip got a crack in plastic cover of radiator, replaced then started leaking transmission fluid bad when drive 30 min or longer. No leak short drive. Mecanic said put 1/2 quart low after replacing rubber hoses to transmission lines. leaks just above small cadalitic converter 6' puddle after long drive, ok around town?
  4. pvjack
    09-26-2012 10:27 PM - permalink
    Aloha Mr Z, u were very nice B-4 with Ur ans. about taking off the bolt when changing T.belt...that worked, but now i cant get the Water Pump off..there is 1 small bolt..i think its a bolt..or a Dol.PIN that was put in from the inside that is holding pump on & i dont want to try & pry it off..so am i going to have to take off the top center of eng to get to it out? Hope u understand..im not very good @ this. What i got b-4 from u was a downlod(www.pajero4x4.ru) of about 50 pages..but no pages with pic of Water Pump...Tks very much. PVJack.Honolulu...bjacksheridan@gmail.com....or same @ Hotmail.com
  5. pvjack
    09-26-2012 10:24 PM - permalink
    Aloha Mr Z, u were very nice B-4 with Ur ans. about taking off the bolt when changing T.belt...that worked, but now i cant get the Water Pump off..there is 1 small bolt..i think its a bolt..or a Dol.PIN that was put in from the inside that is holding pump on & i dont want to try & pry it off..so am i going to have to take off the top center of eng to get to it out? Hope u understand..im not very good @ this. What i got b-4 from u was a downlod(www.pajero4x4.ru) of about 50 pages..but no pages with pic of Water Pump...Tks very much. PVJack.Honolulu
  6. sn22
    03-04-2011 10:46 AM - permalink
    Hi,
    I have an 03 Montero Limited w 155K on it. Time to replace the stock suspension. Could you send me a link or parts list as to what you did to obtain your 2" lift kit from OME?? I would really appreciate it.
    Thanks,
    Scott
    sn22@hotmail.com
  7. schmidty
    11-17-2010 06:09 PM - permalink
    Hey saw your Monty exact same as mine sept for mine is the goldish/tan. if you have done anymore to it please send pics. also do you have a lift?
  8. BigZachBoss02
    11-06-2010 11:07 PM - permalink
    Thanks for the heads up I actually saw the K&N it was around 50 something where I live but it was not in stock so I went with the generic filter did the K&N make a difference for you with the original set up or do you think a custom job would do better?
  9. BigZachBoss02
    11-05-2010 09:45 PM - permalink
    Hey I see you post a bit here and states you have a K&N intake what parts did you use how did you set up and importantly where did you put the mass air flow sensor to not set off the engine light? I have an 02 limited

All times are GMT -5. The time now is 05:17 PM.