Mitsubishi Montero & Montero Sport This sport utility vehicle offers more size than the other Mitsubishi SUVs, but manages to keep a sporty look and comfortable feel, unlike many larger SUVs.

Getting multiple codes (P0134, P0340, P0401, P0403, P0431)

  #1  
Old 06-14-2013, 02:19 PM
Dhanu's Avatar
Junior Member
Thread Starter
Join Date: Jun 2013
Posts: 9
Smile Getting multiple codes (P0134, P0340, P0401, P0403, P0431)

Hi,
I bought a 2002 Montero Limited few days ago and the 'Service Engine Soon' light was on. So I got the codes from an Autozone. There were 9 codes total, but he said some of them were duplicates.
This is what I got.
P0134 - Cylinder 1-4 heated oxygen (front) sensor no activity detected
P0340 - Camshaft position sensor (CMP) circuit
P0401 - EGR insufficient flow detected
P0403 - Exhaust gas recirculation (EGR) control circuit
P0431 - Warm up catalyst efficiency below threshold - cylinders 2-3

What could be the reason behind all of these codes? Is it like a single sensor or one part causing multiple codes?
Any help appreciated.
Thanks in advance.

PS : This is my secondary moving things/ snow days backup vehicle. So I'm not worried about things like fuel efficiency. Just wanted to make sure that it won't break down in the middle of the road.
 

Last edited by Dhanu; 06-14-2013 at 02:48 PM.
  #2  
Old 06-14-2013, 02:33 PM
Sebba's Avatar
Banned
Join Date: Feb 2006
Location: Austin, TX
Posts: 16,176
Default

Check your ECU. Remove your ECU, yank off the cover, and look for damage.

When it spits out that many codes, it usually means it's toast.
 
  #3  
Old 06-14-2013, 02:42 PM
Dhanu's Avatar
Junior Member
Thread Starter
Join Date: Jun 2013
Posts: 9
Default

Originally Posted by Sebba
Check your ECU. Remove your ECU, yank off the cover, and look for damage.

When it spits out that many codes, it usually means it's toast.
Thanks for the reply.
So you mean there would be visible burn marks on the unit?
Now I'll have to find a youtube video to see where the ECU is located
 
  #4  
Old 06-14-2013, 04:09 PM
Sebba's Avatar
Banned
Join Date: Feb 2006
Location: Austin, TX
Posts: 16,176
Default

Here ya go: http://www.justanswer.com/mercury/3a...ero-sport.html

And yes, you will either see burn marks or on the reverse side, you will see where the pins have been soldered on they are a different color than the rest. This means heat, and heat is bad in electrical components.
 
  #5  
Old 06-14-2013, 04:12 PM
Dhanu's Avatar
Junior Member
Thread Starter
Join Date: Jun 2013
Posts: 9
Default

Originally Posted by Sebba
Here ya go: http://www.justanswer.com/mercury/3a...ero-sport.html

And yes, you will either see burn marks or on the reverse side, you will see where the pins have been soldered on they are a different color than the rest. This means heat, and heat is bad in electrical components.
Thanks.
 
  #6  
Old 06-04-2017, 07:19 PM
yatin_ash's Avatar
Junior Member
Join Date: Apr 2017
Posts: 15
Default

I know its a old post but was that really your ECU or the CAT causing all of these codes ?
 
  #7  
Old 06-04-2017, 11:54 PM
HunterD's Avatar
Senior Member
Join Date: Oct 2004
Location: Washington State
Posts: 1,974
Default

Those codes are for different circuits and it is likely that all the codes were true. Since there is a "no activity" code and "circuit fault" code, I'd guess it can be a damage to a wiring harness. It would be nice if OP could reply what the solution was.
 
  #8  
Old 06-05-2017, 01:55 PM
Dhanu's Avatar
Junior Member
Thread Starter
Join Date: Jun 2013
Posts: 9
Default

The engine became as loud as a tractor, so I had the Camshaft position sensor, timing belt, serpentine belt, plugs/wires changed, and that was fixed. The light was still on. Given the price of the vehicle I didn't want to invest too much money in it, so never bothered to really look into the lights. I used it in the same condition for another 3 years and sold it off.
Sorry I can't be anymore of help to you :-)
Good Luck!
 
  #9  
Old 06-08-2017, 01:06 PM
yatin_ash's Avatar
Junior Member
Join Date: Apr 2017
Posts: 15
Default

no worries. Thank you for your input & time.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TDM556
Mitsubishi Montero & Montero Sport
2
05-02-2021 09:52 PM
BamaMech101
Mitsubishi Diamante
2
06-05-2017 11:08 PM
Mpzent86
2nd Generation
0
01-26-2012 09:52 PM
rford69
Mitsubishi Galant
1
04-08-2011 09:08 PM
wrkrbee
Mitsubishi Montero & Montero Sport
5
10-24-2010 07:48 AM


Thread Tools
Search this Thread
Quick Reply: Getting multiple codes (P0134, P0340, P0401, P0403, P0431)



All times are GMT -5. The time now is 04:30 PM.